DIY & Crafts
Make your own Mr. Potato Head
Photography by Ryan Brook Image by: Photography by Ryan Brook
DIY & Crafts
Make your own Mr. Potato Head
Here’s what you’ll need:
-An empty tin can (without lid)

-Electrical tape
-Screws, keys, bottle caps, washers, pipe cleaners, googly eyes, etc.
-Hot glue gun
-Several strong magnets
Step 1: Clean out the can and make sure the edge is smooth—if it isn’t, put electrical tape around the edge for safety.
Step 2: Get started by putting together a Mr. Potato Head face. Use bottle caps for eyes, pipe cleaners for hair, and maybe old keys can become ears—get creative.
Step 3: Use the glue gun to affix magnets to the back of the objects.
Step 4: Place the objects on the can. You will have multiple looks for your Mr. Potato Head.
Get your child's imagination running wild with this DIY fox mask.
-An empty tin can (without lid)

-Electrical tape
-Screws, keys, bottle caps, washers, pipe cleaners, googly eyes, etc.
-Hot glue gun
-Several strong magnets
Step 1: Clean out the can and make sure the edge is smooth—if it isn’t, put electrical tape around the edge for safety.
Step 2: Get started by putting together a Mr. Potato Head face. Use bottle caps for eyes, pipe cleaners for hair, and maybe old keys can become ears—get creative.
Step 3: Use the glue gun to affix magnets to the back of the objects.
Step 4: Place the objects on the can. You will have multiple looks for your Mr. Potato Head.
Get your child's imagination running wild with this DIY fox mask.
Comments